SOFAR Solar & Hybrid Inverters: Single & Three-Phase
The solar inverter is the engine of your clean energy system. SOFAR hybrid inverters manage rooftop solar generation, battery charging, and emergency blackout backup through a single intelligent, fan-free unit engineered for Australian grid standards.
Single-Phase ESI Series vs Three-Phase HYD Series
Choosing the correct inverter depends on the electrical supply entering your property from the street. Both models are Clean Energy Council approved and support smart export control.
| Feature | SOFAR ESI 5K-S1 (Single-Phase) | SOFAR HYD 10KTL-3PH (Three-Phase) |
|---|---|---|
| Rated Continuous AC Output | 5,000 W (5 kW) | 10,000 W (10 kW) |
| Nominal Electrical Supply | 230 V Single-Phase | 400 V / 230 V Three-Phase |
| Solar Input Capacity (DC) | Up to 7,500 W of panels | Up to 15,000 W of panels |
| Number of MPPT Trackers | 2 independent MPPTs | 2 independent MPPTs (Dual string) |
| MPPT Voltage Range | 90 V to 520 V | 180 V to 960 V |
| Emergency Backup Switchover | < 10 ms (UPS grade) | < 10 ms (UPS grade) |
| Three-Phase Phase Balance | N/A (Single-Phase) | Supports 100% Unbalanced Loads |
| Battery Interface | Direct BTS 5K modular bus | High-voltage battery ports (up to 2 inputs) |
| Max Conversion Efficiency | 97.6% | 98.2% |
| Cooling System | Natural convection (silent) | Natural convection (silent) |
| Protection Rating | IP65 Weatherproof | IP65 Weatherproof |
| Standard Warranty | 10 Years | 10 Years |
NSW DNSP Export Limits: Ausgrid, Endeavour & Essential Energy
When installing a solar or hybrid inverter in New South Wales, the maximum allowable export to the grid is determined by your network distributor:
Ausgrid
Inner Sydney, North Shore, Eastern Suburbs, Central Coast, Newcastle
Standard 5 kW export cap on single-phase connections. Up to 10 kW (or flexible connection up to 10 kW per phase) on three-phase connections.
Endeavour Energy
Western Sydney, Blue Mountains, Macarthur, Illawarra, South Coast
Standard 5 kW export limit on single-phase. Three-phase systems support 10 kW standard export, with higher allowances subject to street transformer review.
Essential Energy
Regional & Rural New South Wales
Standard 3 kW to 5 kW single-phase export limits. SOFAR inverters natively support dynamic flexible connection protocols where active.
Frequently Asked Questions About SOFAR Inverters
Can I install a SOFAR inverter first and add the battery later?
Yes. The SOFAR ESI and HYD series are hybrid inverters. They can be installed as solar-only inverters on day one, and the SOFAR BTS 5K battery stack can be added at any point in the future as a simple plug-and-play upgrade without changing inverters.
What is the difference between single-phase and three-phase inverters?
Single-phase inverters (like the ESI 5K) operate on standard 230V residential connections and supply up to 5,000 W of AC power. Three-phase inverters (like the HYD 10K) operate across all three incoming electrical lines (400V) and deliver up to 10,000 W balanced output, supporting large three-phase loads like ducted air conditioning.
Does the inverter make loud humming or fan noise?
No. Both the ESI 5K and HYD 10K hybrid inverters use high-efficiency natural convection heat sinks. There are no noisy mechanical cooling fans, keeping sound levels below 25 dB during normal operation.
What warranty comes with a SOFAR inverter in Australia?
SOFAR hybrid inverters are backed by a 10-year manufacturer warranty supported by an Australian service presence, alongside Kratos Energy's 10-year comprehensive installation warranty.

